Just so you all know there will be a Truck U episode on the Speed Channel. It is supposed to air on September 7th (Sunday) in the am. So be sure to mark your calendar!
My friends have a hard time figuring how to pay thier share for fuel.Jokingly I said get me some oil!,my father in law gets me oil when he goes to Canada(french writting and all),it will be a good family joke until fuel is $6.00 a gallon like canada then they will want you to convert thier rigs..............grease out
2000 7.3X V3 So much fun,so little time,Support small Oil,burn WVO,Free and greasy down the road I go!!!!!!!!!!completely self sufficient and proud of it. (Wood furnace.....X.......solar pontoon....solarsheat twins this summer.....I don't Know much.......I'm just a hillbilly with too many guns..............
Just so you all know there will be a Truck U episode on the Speed Channel. It is supposed to air on September 7th (Sunday) in the am. So be sure to mark your calendar!
Awesome James, I'll have to check that one out!
Greasin & Grinin
Vegi oil powered since Aug 08
2006 F-250 PSD - CC, Lariat, 4X4 - Vegistroke converted 1/27/13!!
2008 F-250 PSD - CC, Lariat, 4X4 - Sold
2005 F-250 PSD - CC, Lariat, 4X4 - Sold
No C-Man Just our hands and arms will be in the shots. They call them B-roll shots. But to make a long story short its Jason and my self doing the install with a lot of B-roll shots so that way they can make it look like, the (talent) as they call them, can look like they're doing the install. All in all it was an great experience it only took us four days to do the install with all that is needed to get the shots that they needed. The Host (The talent) were great guys and easy to work with. Brenton Productions were great and easy to work with as well, Jason and my self are really excited to see the finial out come. We think it will be a good show all in all. And on the encouraging side they were all impressed that the product went on so easy and it worked the very first time from key on pressure test to the first drive with the system coming on in about an 1/8 of a mile with the weather being what it is in Florida. Their little saying on that show is dirve them in and push them out. Makes you think about some of the products you may have seen on that show or any other show for that matter.
PS: If they show a lot of the driving shots with a burnout that would be yours truly with my (BI%CH ie Jason) sitting next to me on the passenger side.
Man, I hope you guys are ready to be completely snowed under for the next lifetime or more. I hope you have extra personnel on hand to answer the phones.
Oh, How about I order a dozen kits now so that I can re-sell them for a profit later???
Really though
Congratulations
Elvia the HandyMan
2000 F350 7.3 XL Dually utility/service truck
V3 March 2008
Yea thats for sure
Hey Marv We can open a veggistroke shop for the South.
I hope to purchase a shop in the next year. Then I can become a official installer. The money is decent, and with 2 people you can do one per day. I installed mine alone in 17 hours. The next one I could probably do in 10 hours or less now that its done.
Elvia the HandyMan
2000 F350 7.3 XL Dually utility/service truck
V3 March 2008
Yea thats for sure
Hey Marv We can open a veggistroke shop for the South.
I hope to purchase a shop in the next year. Then I can become a official installer. The money is decent, and with 2 people you can do one per day. I installed mine alone in 17 hours. The next one I could probably do in 10 hours or less now that its done.
Elvia, it's funny you mention that, I've noticed there aren't any certified installers in this area. If Jason and James could get someone around the Alabama/Georgia area too, they'd probably sell quite a few kits.
And, I agree, the second time around would be much quicker for myself too.
Greasin & Grinin
Vegi oil powered since Aug 08
2006 F-250 PSD - CC, Lariat, 4X4 - Vegistroke converted 1/27/13!!
2008 F-250 PSD - CC, Lariat, 4X4 - Sold
2005 F-250 PSD - CC, Lariat, 4X4 - Sold
Yea thats for sure
Hey Marv We can open a veggistroke shop for the South.
I hope to purchase a shop in the next year. Then I can become a official installer. The money is decent, and with 2 people you can do one per day. I installed mine alone in 17 hours. The next one I could probably do in 10 hours or less now that its done.
This is what i'm thinking about doing. Just got my shop (man house) up and finishing up the wiring and wall paneling inside. Gotta get me a heater soon and I'll be ready to start doing some wrenchin in this dude.
heres the new shop...
Comment