Purge/Run Times

[billman]

So if I am good with my purge time and want to extend my run time after purge.

Will I need to:

1. move 2nd white card switch to on (now 1st and 2nd position switch are on)

2. adjust the other wheel (not the purge wheel, the one on the other side of the timer card)till satisfied.

3. reposition the second switch back to the off position.

If this is correct please let me know.

I noticed my purge time was off and want to also adjust the run after purge in the cold conditions.

[lancaster,pa]

So if I am good with my purge time and want to extend my run time after purge.

Will I need to:

1. move 2nd white card switch to on (now 1st and 2nd position switch are on)

2. adjust the other wheel (not the purge wheel, the one on the other side of the timer card)till satisfied.

3. reposition the second switch back to the off position.

If this is correct please let me know.

I noticed my purge time was off and want to also adjust the run after purge in the cold conditions.

Put switch #1 and #2 to the "off" position (keep #3 and #4 in the "on" position). Adjust the thumbwheel in very small increments until you get the setting you want. Leave all switches set as described above after you complete your adjustment. - Patrick